Your question: What does SPM stand for in Hume doors?

What is SPM door material?

Sliced Pacific Maple flush doors are made from a unique high density honeycomb core construction they have a sliced pacific maple finish ready for staining. … These doors are suited to both contemporary and traditional style homes.

What is SPM veneer?

Sliced Pacific Maple (SPM) veneer skin to allow for a stained finish.

How much can you trim off a Hume door?

A trimming allowance of up to 3mm is allowed on all doors. and 5mm at the bottom (above the floor covering). Place your door on workbench & remove all packaging. Transfer all measurements to the door & clamp the door in preparation for trimming.

What is Duracoat door?

Solid core Doors are a flush panel, duracote finish perfect for painting. They can be used internally where a heavier door is required, but predominantly as an external door, due to its solid construction. We stock a large range of sizes, but if you have an unusual size, we can have it made to order. SC2040720.

Can solicore doors be cut?

The solid blockboard material means it can be cut to any size – making it a fantastic solution for those tricky, uneven doorways.

How much can you trim off a Corinthian door?

A trimming allowance of up to 5mm is allowed on most doors. Keep in mind that approximately 3mm clearance is required for the top and sides of the door and 5mm for the bottom, above the floor covering.

IT IS IMPORTANT:  Question: Should I lubricate garage door?

How much can you trim off doors?

Most internal doors manufacturers advise different trimming tolerances so as a standard and to be on the safe side we advise that you don’t trim more than 5mm per side.

Is Duracote a MDF?

Duracote Tempered Hardboard (sheet thickness 3.2mm) MDF (sheet thickness 4mm)

What is a solid block door?

As the name suggests, blockboard doors are a type of solid door meaning that they are solid all the way through. … You have different options when it comes to the actual “face” or appearance of the door and some of the most common include paint quality plywood, veneered plywood, veneered MDF, MDF, or hardboard.