Can you drill into French doors?
French doors, as they are solid wood, require a little more work and effort to ensure that the French door blinds are properly installed. Use an electric drill with a drill bit smaller than the screws you will be using. … You can now use the screws you selected using the screwdriver.
Should you put blinds on french doors?
If you have blinds that cover your handles, they’ll frustrate you, and you might damage the blinds. Also, the latches or door handles could interfere with the function of the blind or shade. Shallow blinds are ideal for French doors. They allow easy use without restricting access to your door handles.
Can you drill into patio door?
Patio doors come in a variety of construction materials, such as vinyl or glass or wire mesh, but they all share a metal aluminum frame. To drill a hole through a patio door, for example, to run an antenna wire through from the outdoors into the home, use a power drill with a metal drill bit.
How do you lock a French door without bore holes?
If double doors do not have bore holes, use non-turning or dummy function door lock for them. These are often used as decorative door pulls as the ability to latch or lock the door is not necessary. For shallow closets, you can choose door lock only on the exterior side of the door.
What do you put on French doors for privacy?
Painting your French door’s glass panes is another easy way to get more privacy. Use enamel paint or acrylic paint mixed with glass and tile medium, so the paint adheres to the smooth surface of the glass. To keep the paint off the door frame, use painter’s tape to cover the edges around the panes.
Can you put regular curtains on French doors?
DO use full-length curtains over your French doors. For maximum coverage, you want to make sure your curtains extend to the floor. DON’T skimp on curtain width. Make sure your curtains completely cover the doors when they’re closed.
How do you keep blinds from swinging?
Magnets can be used to keep window blinds and shades in place as well. Simply attached a small magnet strip to the back of the bottom rail on the inside of the blind. Next, use magnetic tape and attach it to where the blind would normally hit the window frame.