Your question: Can you use door trim as baseboard?

Can door casing be used as baseboard?

Casings and baseboards are both used as transitional pieces to conceal gaps at joints with wall surfaces. The main difference is that casings are used at window and door openings, while baseboards are used at the junction with the floor.

Can You Use window and door trim as baseboard?

Base molding (or baseboard) is a type of molding, which is applied where the wall and floor meet. Window and door casing should match in the same room. Not necessarily throughout the house. Baseboard generally is not the same size as door/window molding, but a similar style.

What is the difference between trim and casing?

Trim is a general term, often used to describe all types of molding and millwork. Casing is a type of molding, typically used to trim the perimeter of windows and doors. … Crown molding (or crowns) is a type of molding, which is applied where the wall and ceiling meet.

What size baseboards are in style?

A general rule of thumb for your baseboards is the 7 percent rule — they should equal 7 percent of the overall height of your room. So, if you have 8-foot ceilings, your baseboards will look best at around 7 inches high.

IT IS IMPORTANT:  Do dryer doors open left or right?

What are casings and baseboards?

The casing is the decorative trim, or molding, that gets installed around your interior doors and windows. The baseboard is the molding that follows the base of the wall along the floor line.

Should window trim and door trim be the same size?

Generally, vertical trim elements such as door and window casings should be smaller and have less heft than baseboards. So I’ve found that a good rule of thumb for sizing window and door casings is to keep them at about 50 percent of the height of the baseboard. As always, this isn’t a hard and fast rule.

What type of trim should I use?

With a trim project you’re going to have to decide what types of trim you want to use. A good place to learn the types of trim is Lowe’s glossary. They are bare wood, primed wood, medium-density fiberboard, polystyrene and PVC trim. You should use bare wood if you want to stain it or have a natural wood look.

What size trim should I use?

Generally speaking, the more modern your home is, the smaller the trim. Even in contemporary homes, I tend to use a 2 1/4″ trim or 3″ is good too. If your home is more traditional, then move to 4″ or even 5″.

What is trim around doors called?

Casing: Trim used around door and window openings. Exterior casing trims the exterior of windows and doors.