Why is my door lock stiff?

Is it OK to put WD40 in a lock?

Do not use WD-40, WD-40 is a solvent, not a lubricant and will, in fact, remove any type of lubricant that is in the cylinder. Use a lubricant that has a silicone, graphite or Teflon base only. Make sure the lock cylinder is facing up and spray or pour the lubricant into the cylinder.

Why is my door not locking?

Door locking problems almost always originate in the door latch, not the locking mechanism. The striker fails to penetrate into the door jamb because the door or the door jamb has become warped, or the screws have loosened and the plate has moved. … Shut the door and try to lock it. If it won’t lock open the door.

How do you open a stubborn lock?

Use silicone thread lubricant to moisten the jammed lock, making it easier to insert the key. Consider putting a small dot of graphite in the keyhole if the lock still does not open. Once you have applied graphite to the key, try to open the jammed lock at least four times so the graphite has a chance to work.

Why won’t my key turn in the lock?

If the key won’t turn in the door lock, the problem could be dirt or dust in the cylinder causing the pins to be stuck in a partially raised position. … You can spray dry lubricant into the keyway and then insert the key a few times to get the lubricant working. If a dry lubricant doesn’t work, you can try WD-40.

IT IS IMPORTANT:  How do you sand and paint a garage door?

Will WD-40 unfreeze a lock?

Q: WD-40 shouldn’t be used in door locks or ignition locks. It dries out and turns to goo, which can cause the tumblers to stick. It was initially meant as a de-rusting spray and general-purpose lubricant (say, door hinges).

What can I use to lubricate door locks?

Spray a light all-purpose household lubricant or silicone lubricant on all moving parts of the lock, flushing out the latchbolt. Use powdered graphite to lubricate the lock cylinder.

How long should a door lock last?

It’s common to believe a door lock will always work. Even hardware store-quality locks can operate for decades, depending on the amount of usage. Most residential locksmiths agree the average lock’s lifespan is about seven years.

What is the best lubricant for door locks?

Graphite lubricant is the choice for locks because it doesn’t attract dust and dirt, which can damage the locking mechanism.

What should you not use WD-40 on?

But Don’t Spray It On:

  • Door hinges. Sure, WD-40 will stop the squeaking, but it also attracts dust and dirt. …
  • Bike chains. WD-40 can cause dirt and dust to stick to a chain. …
  • Paintball guns. WD-40 can melt the seals in the guns.
  • Locks. …
  • iPods and iPads.