What is the difference between a single and double bypass barn door?

What is a bypass sliding barn door?

Bypass sliding barn doors are different than normal sliding barn doors because one door slides behind the other and bypasses it. … Bypass doors are different than double barn doors, which cannot slide behind each other and still require more wall space.

Can you overlap barn doors?

Barn doors can be installed to overlap each other, but it requires a different installation technique and barn door hardware, which can increase cost. The doors will need to be offset from each other on the track or sometimes even use an extra track.

How much should bypass barn doors overlap?

The combined width of the doors should equal the width of the opening plus at least 1 inch. This provides 1/2 inch of overlap between the two doors when they are closed.

What size opening do I need for a 42 inch barn door?

Determine which wall and direction you want your barn door to slide open. On this wall, measure from the inside of your door jamb across the wall surface. You will need a minimum of 40-3/8” for a 36” wide door and at least 43” for a 42” wide door. The entire wall, from ceiling to floor, will need to be unobstructed.

IT IS IMPORTANT:  Can you use an exterior door knob inside?