What does a blower door test do?

How hard is it to pass a blower door test?

It is estimated that 50% of newly constructed homes will fail the blower door or air-tightness test. … Most blower door test failures occur because of a lack of understanding of what is necessary to create a continuous air barrier system.

How do I test my home efficiency?

Related To:

  1. A blower door test measures the airtightness of the home. …
  2. Low-emissivity window checkers are handheld devices that are placed on the interior pane of a window to detect if a window has a low-emissivity coating. …
  3. Infrared, or IR, cameras take infrared images of a house.

How do you pass a blower door test?

Passing Your Blower Door Test

  1. Have an airsealing plan BEFORE you start construction. …
  2. Make sure your sub-contractors are on board with the airsealing plan and are willing to seal all their penetrations. …
  3. Make sure all major penetrations are properly sealed.

How do I prepare for a blower door test?

Easy Steps to Seal: How to Prepare for a Blower Door Test

  1. Step 1: Close all windows. …
  2. Step 2: Open all interior doors. …
  3. Step 3: Close all exterior doors. …
  4. Step 4: Turn off thermostats, air conditioners and fans. …
  5. Step 5: Prepare the fireplace.
IT IS IMPORTANT:  Can you buy exterior doors that are not Prehung?

What is a good air tightness score?

A test result of between 3m3/hr/m2 and 5m3/hr/m2 is generally regarded as best practice for naturally ventilated dwellings while test results less than 3m3/hr/m2 are generally recommended for mechanically ventilated dwellings.

What does ACH50 mean?

Air Change per Hour at 50 Pa (ACH50) is calculated by multiplying CFM50 by 60 to get air flow per hour, and dividing the result by the volume of the building. ACH50 tells us how many times per hour the entire volume of air in the building is replaced when the building envelope is subjected to a 50 Pascal pressure.

How do I check my blower efficiency?

Fan efficiency is defined as the air power divided by the fan input power. Both Static and Total Efficiency can be calculated from fan performance data as follows: Where: CFM = Fan flow rate, ft3/min Ps = Static pressure, in. wg Pt = Total pressure, in.

Why is it important to perform a blower door and duct test?

A blower door test is a way to determine how airtight a home is and how much ventilation you will need to provide an acceptable indoor air quality. If a home is leaking air, those leaks can increase energy costs and create moisture condensation problems.