Question: Why is there a gap between my French doors?

Are French doors supposed to have a gap?

When calculating the width remember there are three gaps between the doors instead of two, plus a jamb on each side of the opening. So if the doors are 24-inches wide, leave a 1/4-inch gap between doors and between each door and the jamb. … This adds up to a total of 51 1/4 inches for the width of the opening.

How do you close the gap between double doors?

Double doors often require a hardware device known as an “astragal.” The astragal helps seal the gap between pairs of doors, and is used to block sound or air drafts. Before you install an astragal, you must first determine how your doors are configured, as well as what size astragal you need to use.

How do you fix gaps on a French door?

Close the gap between the two doors with insulated molding. Nail it to one of the doors using small wood nails so that it overlaps the other door by about one-half inch, covering the gap. Place nails about every 5 inches. Cover the nail heads with wood putty and sand them smooth.

How do you fix a gap at the top of a French door?

Close the French doors and examine the tops of the door to see if these adjustments closed the gaps. If the top of the doors still appear to sag slightly, loosen the screws on the jamb side of the bottom hinges one or two turns. Tighten the top screws on the jamb side of the hinge as tight as you can by hand.

IT IS IMPORTANT:  Are vinyl doors energy efficient?

What is a double door astragal?

With double doors, an astragal is attached to the vertical meeting edge of one door leaf. The astragal can be attached to the active (entries/exits) or inactive leaf, depending on the function and application. On double egress doors, astragals can be attached to either leaf since both are active.