How do you enter codes on Kwikset?

How do I add codes to Kwikset SmartCode?

How to add a user code on my Smartcode touchscreen?

  1. Keep door open. Press the Program button once. …
  2. Press Checkmark symbol once.
  3. Enter Mastercode.
  4. Press Lock symbol once.
  5. Enter new user code.
  6. Press Lock symbol once. …
  7. While the door is open and locked, test the user code to make sure it unlocks the door.

How do I reset my Kwikset SmartCode master code?

How do I enable/delete the mastercode on my Smartcode?

  1. Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds).
  2. Enter new Mastercode.
  3. Press Lock button once.
  4. Re-enter Mastercode.
  5. Press Lock button once. …
  6. Make sure switch #3 is on, and press the Program button once.

How do you clear the code on a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

IT IS IMPORTANT:  Frequent question: What is an elevator hoistway door?

How do you program a Kwikset SmartCode 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.