How do I remove master code from Kwikset lock?

How do I reset my Kwikset SmartCode master code?

How to restore default settings on my SmartCode 955? Perform a factory reset

  1. Make sure the door is open and unlocked.
  2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
  3. Press and release the program button. You will hear one short beep.

How do I reset my Kwikset lock code without master code?

If you do not have the master or user code you may do a factory reset on the unit to program a new master code into the lock. The link provided will guide on how to factory reset the lock and program the lock. Click here.

How do I delete all codes on Kwikset?

How do I delete all user codes on my SmartCode?

  1. Keep door open. Press the Program button once. …
  2. Press Lock button once.
  3. Enter Mastercode.
  4. Press Lock button once.
  5. Press “9” six times.
  6. Press Lock button once.
  7. Press “9” six times.
  8. Press Lock button once.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

IT IS IMPORTANT:  How do you paint a door without taking it down?

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

How do you reset a Kwikset lock?

1 Factory Reset

  1. Open your door.
  2. Extend the latch bolt.
  3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
  4. Push and hold the reset button for 10 seconds, until the lock beeps.
  5. The light ring will flash red, then spin amber.
  6. The lock has now been restored and is ready to be set up again.

How do you change the 4 digit code on a Kwikset keypad lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.