How do I delete the code on my Kwikset lock?

How do I delete all codes on Kwikset Smartcode?

How do I delete all user codes on my SmartCode?

  1. Keep door open. Press the Program button once. …
  2. Press Lock button once.
  3. Enter Mastercode.
  4. Press Lock button once.
  5. Press “9” six times.
  6. Press Lock button once.
  7. Press “9” six times.
  8. Press Lock button once.

How do I remove a code from Kwikset Smartcode 909?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do you reset a Kwikset lock without the code?

You may reset the lock by pressing the Premis Button “A” on the back panel for 20 seconds.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

IT IS IMPORTANT:  Your question: How do subway doors work?

How do I remove the code from my Weiser Smart Lock?

While the door is open, test the user code to make sure it no longer unlocks the door. 2 Press Lock button once. 4 Press Lock button once. 3 Enter user code to be deleted.

How do you change the code on a Kwikset keypad lock?

How do I reset a code on my Powerbolt?

  1. Insert functioning key & turn 1/4 turn clockwise.
  2. Insert & remove the SmartKey learn tool. Remove functioning key.
  3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do I reset the master code on a Kwikset 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

How do you reset a Kwikset lock 913?

Press and hold the program button while reinserting the battery pack. Keep holding the button for 30 seconds until it beeps. Press the program button once more in 20 seconds the LED will flash green and you will hear a beep. 0 of 4 found this helpful.