How close to Wall can french door refrigerator be?

How close to a wall can you put a refrigerator?

The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.

How much clearance do you need to open a refrigerator door?

When the door is open, is there enough space on the hinge side for the door to open without hitting your walls? If there’s not about 2-inches of space on the hinge side, then you’ll have to keep in mind that the refrigerator will need to be pulled out about 2-inches to make up for this.

Do you have to open both doors on a French door refrigerator?

Save Energy with Two Doors

But, with a French door refrigerator, you do not have to open both doors. This means you are releasing less cold air and, in turn, causing the refrigerator to not have to work as hard to replace it.

IT IS IMPORTANT:  Should I paint doors and trim same color?

How much clearance do you need for French doors?

So if the doors are 24-inches wide, leave a 1/4-inch gap between doors and between each door and the jamb. And don’t forget that the jamb is usually 1-inch thick with another 1/4-inch space between the frame and the jamb. This adds up to a total of 51 1/4 inches for the width of the opening.

Does a fridge need space on the sides?

Ventilation Space

Make sure that your refrigerator can breathe. Without proper ventilation you can damage the fridge and cause it to consume more energy. You’ll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.

Can fridge be on exterior wall?

If the refrigerator is against an exterior wall. Taking the wall back just a few inches will prevent your refrigerator from impeding the flow of traffic in a small kitchen, and will allow you just enough added depth to achieve that almost flush look without sacrificing interior fridge space or breaking the bank.

How much space do you need for a 36 inch refrigerator?

Typically, the standard size for a professional-grade refrigerator falls between 30 to 36 inches width, 67 to 70 inches in height, and 29 to 35 inches in depth. When it comes to the interior, the refrigerator itself should provide you with 14 to 20 cubic feet of space.

What size opening do I need for a 36 inch refrigerator?

To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right.

IT IS IMPORTANT:  How much does it cost to hang a front door?