How are closet doors measured?

What is the standard size for closet doors?

The average closet door has a width of 30 inches and a height of 96 inches, though sizes can vary widely. Bi-fold doors are common closet door types, which have two panels for a single door and four panels for double doors. Bi-fold doors are available in a range of sizes to fit your needs.

How wide is a double door closet?

There are common widths, though. For double doors, they will commonly be 60″ (2 x 30″), 64″ (2 x 32″), and 72″ (2 x 36″).

Is an 80-inch door really 80 inches?

Interior doors come in standard heights, widths, and thicknesses, as follows: Standard door height for interiors is 80 inches. … An 80-inch door is called a 6/8 door (pronounced “six-eight”) because it’s 6′ 8” tall. In stock, you will also find a slightly shorter 78-inch door.

What are door sizes?

Standard Door Width & Length Guide

Type Height Width
Standard Door 80” 36”
Standard Exterior Door 80” 36”
Sliding Glass Door Sizes 80” 60” – 72”
French Door Sizes 80” 36”

How much should closet doors overlap?

Measure the Space. Sliding doors need to overlap in the center by 2 to 3 inches, so keep that in mind as you figure your door measurements. Because not all doorways are plumb, measure the width of the doorway at both the top and bottom of the closet doorjambs.

IT IS IMPORTANT:  Frequent question: Are bifold doors left or right?

How do you write the size of a closet?


  1. Follow the vertical approach for height and adjust to horizontal to measure width.
  2. Secure the 1” mark against the left wall of the closet then pull the tape until you reach the right wall. …
  3. Measure at 3 heights on the wall (low, middle, high)
  4. Record the smallest measurement on the worksheet.

How do I measure my room for wardrobe?


  1. Take a photo of the area where you want the wardrobe.
  2. Measure height from floor to ceiling and floor to cornice. …
  3. Measure the width. …
  4. Measure the depth from front to back on both ends of the wardrobe.
  5. Measure the distance from the back of the wardrobe to the start of the window architrave.

How do you calculate the area of a closet?

Calculate the square footage of each space by multiplying the length by width.

  1. Room: Length (ft) x Width (ft) = Room SQFT (Square Footage)
  2. Closet# 1: Length (ft) x Width (ft) = Closet #1 SQFT.
  3. Closet# 2: Length (ft) x Width (ft) = Closet #2 SQFT.