Your question: How often do you need to check a fire door?

How do you inspect a fire rated door?

What are the basic criteria that are verified during a fire door assembly inspection?

  1. Labels are present and legible. …
  2. No holes or breaks in the door or frame. …
  3. Glazing and glass kit / glass beads are intact and securely fastened. …
  4. Door, frame, and hardware are in proper working order. …
  5. No missing or broken parts.

Are fire doors a legal requirement?

Why do you need to provide fire doors? They are specifically designed to withstand fire for up to 30 minutes. They are a legal requirement for flats which open onto communal areas shared with other tenants. This is to make sure crucial escape routes are protected if a fire breaks out.

Who can check my fire door?

If possible, employ a registered FDIS inspector to check your fire doors. These are people that have achieved a diploma in fire doors and have had their competence and knowledge independently assessed.

Should a fire door have a gap at the bottom?

Gaps between fire doors and the door frame should never be more than 4mm or less than 2mm. It’s recommended to aim for a 3mm gap to ensure adequate room for the intumescent strips to activate in the event of a fire, and for the smoke seal strips (if installed) to not get damaged by the opening and closing of the door.

IT IS IMPORTANT:  Is it rude to lock bedroom door?

How do you recertify a fire door?

Fire doors must be certified by an accredited testing laboratory. Usually the laboratory’s certification label is on the doors edge, and is required to include the door’s fire rating. Each and every fire door requires a fire resistance rating.

What is the British Standard for fire doors?

BSI, the business standards company, has revised BS 8214 Code of practice for fire door assemblies. … Fortunately for the industry, BS 8214 is the benchmark standard for the correct installation and maintenance of timber-based fire doors.”

Do smoke doors have to latch?

The code does not require that smoke barrier doors have latching hardware. Where latching hardware is installed on a smoke barrier door, it must be maintained so that it is functional or be removed.

Do I need intumescent strips on my fire doors?

The Building Regulations indicate where you have fire doors, these would require intumescent strips. … If the gap is too wide, it may compromise the door’s ability to restrict the spread of fire and smoke.