Your question: How do you revamp a louvered door?

How can I make my louvered doors look better?

Swap out the louvers for wood panels. It’s a relatively easy-to-do exchange and a great way to retrofit your doors. Add paint or stain for a new look. Use decorative molding strips with carvings or multiple molding strips to make your doors even more distinctive.

Are louvered doors outdated?

Louvered doors have survived in interior design and home decor for a long time because of their versatility. Aside from placing them over closets that could use additional airflow to prevent moisture or musty odors, they work well in laundry rooms, utility closets, and bedrooms.

How do you paint a louvered door?

Apply paint to the louver doors in the exact same manner as you did the primer. Allow the paint to dry for two hours, then apply an additional coat, if necessary. Allow the second coat to dry thoroughly. Reattach the doorknobs.

What can I use instead of a louvered door?

Bifold doors, curtains or sliding doors can be alternatives and can be matched to complement your style. A fresh coat of paint can spruce up a functioning set of louvered or shuttered closet doors but take care not to allow any drips on the track and watch for drips between slats.

IT IS IMPORTANT:  How do I increase the range of my garage door remote?

What can I make with old louvered doors?

Old louvered doors are well-suited to be dividers or screens, both indoors and in the garden, as the slats visually break up the surface of the doors, let light through and make the divider seem less bulky. For a screen to use in the house, cut the doors to size vertically and hinge them together.

How much does it cost to paint a louvered door?

On average, it costs between $80 and $200 to paint a louvered door.

How do you clean louvered doors before painting?

Clean all the dust and dirt off with a clean brush and wipe down with a cloth and white spirit to remove any greasy residue. Any grease or dust on the surface of the door can prevent proper paint adhesion causing it to flake off later on.

How do you paint an accordion door?

Open a can of latex enamel paint and stir it thoroughly with a paint stick. Pour some of the paint into a paint tray. Apply paint to the doors’ panels with a 1-inch to 2-inch brush, working from the center outward. For now, you will only be painting the side of the doors facing upward from the sawhorses.

Can you paint metal louvered doors?

Shake and open a can of rust-inhibiting, spray enamel paint. Apply three light, even coats of paint on hard-to-reach areas around the louvers, letting each coat dry before applying the next. Turn the door over, and repeat on the opposite side.