Quick Answer: How do I change the master code on my Kwikset 888?

How do I reset my Kwikset master code?

How do I change the mastercode on my Powerbolt 2?

  1. Make sure the lock is unlocked and the door is open.
  2. Enter your Mastercode – for new install, default is 0-0-0-0.
  3. Press the lock button. You will hear one beep.
  4. Press 7.
  5. Press the lock button. You will hear one beep.
  6. Enter a new Mastercode. …
  7. Press the lock button.

How do you remove a code from a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do I change the master code on Kwikset SmartCode 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.
IT IS IMPORTANT:  How do you open a frozen garage door?

How do I reset my Kwikset lock code without master code?

If you do not have the master or user code you may do a factory reset on the unit to program a new master code into the lock. The link provided will guide on how to factory reset the lock and program the lock. Click here.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do I reset my Yale door lock code without master code?

I’ve forgotten or need to change my Primary Code

  1. Locate the black battery cover at the top of the inside door handle.
  2. Remove the battery cover.
  3. Then remove the rear cover.
  4. Now remove the cable.
  5. Press both the I and P buttons at the same time and then place the batteries back in.

How do I reset the master code on a Yale door lock?

How do I change the 4 digit master code on my lock?

  1. Press “Yale” to activate.
  2. Enter 4-digit master code.
  3. Press the gear symbol.
  4. Press “1”.
  5. Press the gear symbol.
  6. Enter new desired 4-digit master code.
  7. Press the gear symbol.
  8. Test new code to make sure it works.
IT IS IMPORTANT:  Can you patch a hole in a garage door?

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.