# How much clearance do you need on a push side of a door?

Contents
Type of Use Minimum Maneuvering Clearance
Approach Direction Door or Gate Side Perpendicular to Doorway
From front Push 48 inches (1220 mm)
From hinge side Pull 60 inches (1525 mm)
From hinge side Pull 54 inches (1370 mm)

## What is the required clear distance on the push side of an interior door?

Door openings shall have a minimum clear opening width of 32 inches; however, if the doorway is more than 24 inches deep, then a minimum clearance of 36 inches is required. The clear opening is measured from the face of the door to the stop of the frame while the door is opened to 90 degrees.

## What are the clearances required on the push side of the door and the pull side of the door when the door has both a closer and a latch per the ADA )?

No, latch clearance 12” minimum is required for forward approaches on the push-side of doors equipped with both a closer and a latch. … For latch approaches, additional clearance is required on the push side and the pull side when just a closer is provided.

IT IS IMPORTANT:  Frequent question: Do plane doors open in or out?

## How much clearance do you need for a door to open?

When measuring for a door, you should ideally leave at least 2 inches but maybe more like 2 1/2 or 3 inches. If you’re using a door rough out, you should have a minimum of 3 inches.

## Do doors need to open 90 degrees?

In general, the requirements are a minimum of 32” in width and a maximum of 48” and the door must open to 90 degrees. Section 404 of the ADA states: “Door openings shall provide a clear width of 32 inches (815 mm) minimum.

## Can a door swing into another doors clearance?

Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space.

## How do you determine the swing clearance of a door?

Add 36 inches in both directions for ease of traffic flow. For example, if the door overall width is 48 inches, the door requires a minimum of 24 inches in front and behind the door for operation, but for optimal operation, allow 60 inches to the front and to the back.

## What makes a door handle ADA compliant?

To comply with ADA standards, a door handle may be no lower than 34 inches from the floor and no higher than 48 inches above the floor. This is measured from the surface itself, and not from the bottom of the door. So be aware of that distinction as you go to measure your handle height for each door.