How do you open a padlock without the code?

Pull up gently on the shackle and hold it in place. Turn the dial clockwise listening carefully until you hear the lock click. Start with a good deal of pressure and gently let up as you spin it around, until you meet resistance in only one place. If the dial catches every few numbers, you are pulling too hard.

How do you break into a combination lock?

Standard instructions for combination lock:

  1. Turn right three times. Stop at First Digit.
  2. Turn left one full turn passing 1st number and stop at Second Digit.
  3. Turn right and stop at Third Digit. Pull shackle. Profit. Samy Kamkar. 197K subscribers. Subscribe.

How do you reset a 4 digit combination lock if you forgot the code?

If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.

How do you reset a Master combination lock if you forgot the code?

Resetting your Combination Lock

  1. Open the lock using the previous combination. …
  2. Insert the reset tool in the hole on the side of the lock. …
  3. Push the reset tool in and turn 90° in either direction. …
  4. Set wheels to your new combination.
  5. Turn and remove the reset tool. …
  6. Record your combination in a safe place.
IT IS IMPORTANT:  Which type of door sweep is best?

How do you open a hardened combination lock?

How to Open Hardened Combination Locks

  1. Begin spinning the combination wheel counterclockwise. …
  2. Calculate your options for the first and second numbers systematically. …
  3. Spin the dial through your possible choices for the first and second numbers, always ending with the third number you calculated, until the lock opens.

How do you open a Samsonite lock without the code?

Start by pulling up on the dial and turning it clockwise until you hear the lock click. Check what number you’re at, add 5 to that number. Write that number down. Set the dial to that number and turn it counterclockwise until you hear it click again.