How do you lock the door on a GE self cleaning oven?

How do I lock my oven door?

To set the oven Lock feature (instructions may vary by model – check your Owner’s Manual for more details): Press OFF and hold for 6 seconds. Lock will appear in the display, the door locked indicator light will flash, and the door lock will begin to close. Allow about 15 seconds for the oven door to lock.

How do you lock GE oven door?

A GE Profile oven offers lockable controls so none of the settings can be turned on or changed accidentally by a child. The lockout setting is activated by pushing and holding the “lock controls” button for three seconds.

How do you reset a GE oven door lock?

Manual Switch:

  1. Press the Self Clean pad.
  2. Close the oven door.
  3. Slide the latch to lock the oven door.
  4. Hit the Clear/Off or Cancel button immediately.
  5. Unlock the door.
  6. The control should now be reset and there should not be a need for service.

Why does my GE oven say locked door?

When a problem occurs with a GE oven, the electronic control panel displays an error code. If the oven keeps flashing a locked door “F9” code, this indicates the door lock circuit needs to be fixed. In some instances, GE oven owners can easily fix it themselves, while in other cases, it’s best to contact GE for help.

IT IS IMPORTANT:  Are composite doors fire rated?

Can you lock oven door while cooking?

The oven door lock on ranges and wall ovens is designed to be used during a self-clean cycle only. If your oven has a manual lock (a door latch handle that you can slide from left to right), do not manually lock the oven when using other functions.

How do you manually unlock a GE oven door?

Try the following to unlock the door: Disconnect power to range for 30 seconds.

Range – Oven Door Won’t Unlock

  1. If there is food in the oven, let the oven cool to room temperature and try to unlatch the door.
  2. If no food or utensils are in the oven, start a Self-Clean cycle, then hit the Clear/Off pad after 60 seconds.

Why can’t I open my oven door after self clean?

If you’re unable to open the oven door when the self-cleaning is over, your door lock/motor assembly may be malfunctioning. First, try to “reboot” the oven by unplugging it, waiting 5 minutes, and plugging it back in: sometimes this resets the lock and your oven door will be back to normal.

How do you reset a GE oven?

Reset the electronic control. Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.

How do I troubleshoot my GE oven?

How to Troubleshoot a GE Electric Oven

  1. Make sure your GE electric oven controls are set for either bake or broil if the oven does not heat, but the burners do heat. …
  2. Check the oven knobs and make sure they are in the right position if the device is not producing heat. …
  3. Unplug your GE electric oven and check the fuse.
IT IS IMPORTANT:  Best answer: How much does a handyman charge to install a barn door?

Why is my oven still locked after cleaning?

If the door will not unlock at the end of the clean cycle then you may have a problem with the oven temperature sensor. … This may reset the control and allow you to unlock the door. If you still cannot unlock the door, then you can check the oven temperature sensor from the back.

What does it mean when the oven says unlock door?

The control board believes the door is locked even though it’s not locked. … If it continues to display “unlock door”, the electronic oven control will need to be replaced. Note: The range will not go into the self clean mode if you don’t replace the door lock assembly but you should be able to use the bake and broil.