How do I stop my refrigerator door from squeaking?
The quickest and cleanest way to eliminate the squeaking of a refrigerator door is to lubricate the top and bottom hinges with the below recommended oils, then work the door back and forth until the noise goes away. See also Lubricants in Refrigerators and Freezers.
Why has my fridge door started squeaking?
Refrigerator door hinges can develop an annoying squeak just like any other door. The lubricant inside the hinge eventually wears off so you can hear the metal rubbing together, resulting in the squeaky noise. … A quick lubricating job allows the hinges to glide smoothly so you can open the door quietly and smoothly.
What should I use to lubricate a refrigerator door?
Rub a thin layer of petroleum jelly with your finger or a paper towel along the surface of your refrigerator gasket seal. Just a very thin layer is enough. Get as much of the rubber as you can reach, but the most important surface is where the gasket touches the fridge doorway.
How do you fix a squeaky freezer door?
Upright & Chest Freezer – Door or Lid Squeaking
- Lubricate the hinges with an approved oil or lubricant. We recommend using pure paraffin wax (not candle wax), pure petroleum jelly or pure mineral oil.
- After lubricating the hinge, work the door or lid back and forth until the noise is eliminated.
Can you use wd40 on fridge door?
But one place where you should not use WD-40 is a squeaky door hinge, as the lubricant can attract dirt and dust, and may eventually cause the hinge pin to turn black. Better choices to silence the shrieks are common bar soap or petroleum jelly.
Why does my LG refrigerator door squeak?
If the squeaking sound is occurring when the doors are opened or closed, it may be that the doors are not being aligned properly or the unit is not leveled. If this is the case, align the doors or level the unit. The hinges may also be dry. Apply a food grade silicon grease to the hinge to quiet the noise.
How do you lubricate a refrigerator door gasket?
Apply a light coat of petroleum jelly to the top and front face of the gasket by dipping your finger in the jelly and rubbing it vigorously across all surfaces. Wipe any excess petroleum jelly from the area with the dry rag.