How do you cover a window on a metal door?

Stick ‘Em Up. Double-sided carpet tape and self-sticking hook-and-loop tape both work well on metal doors. Use either one to mount curtains along just the top or the top and bottom of the door’s window. The material lies flat and has no rod to hit the wall behind when the door is fully open.

What can I use to cover a window in a door?

Take a look for yourself at these glass door window covering ideas:

  1. Faux Wood Blinds. Faux wood blinds for your glass door will bring instant warmth to your space. …
  2. Drapes. Using drapes for glass doors allows you to accentuate the doors’ beauty without hiding it. …
  3. Sheer Shades. …
  4. Honeycomb Shades. …
  5. Shutters.

Can you put blinds on a metal door?

Virtually any window blind can be attached to a steel door. … Using self-tapping screws and a hand drill, attach the mounting brackets to the steel door where you marked. Self-tapping screws are designed to drill their own hole.

How do you cover a metal door?

Let paint dry completely, then rehang door.

  1. STEP 1: Remove the door, if possible. …
  2. STEP 2: Remove hardware and protect areas you do not wish to paint. …
  3. STEP 3: Clean the door thoroughly with a degreaser. …
  4. STEP 4: Lightly sand the door. …
  5. STEP 5: Remove all sanding dust and lingering debris. …
  6. STEP 6: Apply primer.
IT IS IMPORTANT:  What do different colored front doors mean?

Can you mount blinds on a door?

Though a door may limit the way you install your blinds, it’s not impossible. You can’t use an outside mount since it will restrict the door’s movement, and you can’t install an inside mount on the door since most doors do not have enough space, but you can install an outside mount-type style on the door itself.

How do you screw into a hollow metal door?

To drill the hole, first locate where you want it with a pencil. Then use a center punch with a hammer to tap a small indent right where you want the hole. If you don’t have a center punch use a nail. If you don’t tap a center mark, your drill will skate right across the surface of the door and scratch the paint.

Can you drill a curtain rod into a door?

Standard curtain rod brackets require drilling screw holes through the metal layer of the door, and repeated stress from the curtains swinging as the door opens and closes can eventually loosen the bracket screws.

Do you have to sand a metal door before painting?

If the paint isn’t flakey or peeling, you don’t need to sand the door. However, make sure you prime it before repainting to make sure the new paint layer adheres well. … You do this by removing any grease, oil, and dirt, sanding down the door, and then priming it appropriately before painting.

Can you use Kilz on a metal door?

KILZ 2 can be applied to painted or galvanized metal just be sure to clean thoroughly and remove any pre-existing peeling paint before you prime.

IT IS IMPORTANT:  How do you hang Christmas wreaths on doors?