How do I reset my Kwikset auto lock?

How do you program a Kwikset Smart Lock?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

Why won’t my Kwikset lock stop beeping?

The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt. To turn the beeping sound off: … Reinstall the battery cover.

How do you remove a code from a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.
IT IS IMPORTANT:  You asked: Can you spray paint bifold doors?

How do you reset a Kwikset 910 lock?

How to perform a factory reset:

  1. Remove the batteries.
  2. Press and hold the lock button on the keypad.
  3. Place the batteries back in (while still holding the button)
  4. The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

How do you reset a Kwikset 264?

Press and hold the Reset button for 5 seconds, until you hear 3 beeps and see the Kwikset button flash amber 3 times. 2. Enter the default PC (O-O-O-0).

Why is my automatic door lock beeping?

If your Electronic Door Lock is beeping and the buttons are flashing red, this means that there’s been some kind of error or the batteries are low. If the batteries have already been changed and you still see a red flashing light when you try to use the lock, there could be an error with the lock.

Why is my Kwikset lock beeping 10 times?

If you hear 1 long beep, it means that the turnpiece rotated to locked position. If you hear 10 short beeps and 10 short red flashes, it means low battery. If you hear 15 long beeps and 15 long red flashes, it means 3 incorrect user codes entered.

Why is my Kwikset lock beeping red?

What Do The Different Colored Lights On The Status LED Mean for my Premis Lock? Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.