How do I connect to Schlage WIFI?
1Navigate to the menu in the app and click Wi-Fi Adapters. 2Click the “+” in the top right corner of the page. 3Type in the programming code located on the back of your Wi-Fi Adapter. 4Then plug in your Wi-Fi Adapter within 40 feet of your Schlage Sense Smart Deadbolt.
Why is my Schlage Lock not connecting?
Factory Resetting Your Device
First of all, disconnect the batteries. … Reconnect the batteries to the while holding the button on your Schlage Connect. After you’ve reconnected the batteries, release your button. The lock should do a setup routine if you have successfully reset your device.
Is there an app for Schlage connect?
The free Schlage Home App for Apple iOS and Android lets you control and monitor your lock from anywhere using your smartphone. The app guides you through the setup process and puts complete access and control of your Schlage smart locks at your fingertips.
How do you put Schlage sense in pairing mode?
It’s easy to set up – plug it in within Bluetooth range of the lock (usually about 40 feet), and use the Schlage Sense app to connect the Adapter to your home Wi-Fi network. Then pair it with your lock.
How do I connect my phone to Schlage?
To pair your Schlage Connect Smart Deadbolt with Samsung SmartThings, open the SmartThings app on your mobile device and tap on Home. Under Things, choose Add a Thing and follow the directions in the app. At the end of enrollment, a green light on your lock indicates success.
How do you reset a Schlage Lock?
Reset the Schlage lock by engaging the reset button if one is available, or by disconnecting the battery. Once the cover and housing are removed, if the button is there, simply press and hold it until the red light isn’t flashing anymore. Release it and wait until the lock resets itself and the light turns blue.
How do I change my 4 digit Schlage Lock code?
Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.
Can more than one person use the Schlage app?
Setting up multiple users on the Schlage Home App will allow you to have multiple devices being used as the keys. With the access set up on the devices that you want to use, and allow them access to the locks from Schlage, you can manage different levels of security and access for each user.
What is the difference between Schlage connect and Schlage sense?
While they look very similar, their smart home integration is the key difference between both locks. … Schlage Sense works with HomeKit for controlling your lock using Siri. Schlage Connect is designed for Alexa and Z-Wave integration. Schlage Encode is a WiFi lock that doesn’t require a hub.
Can I use Schlage connect without hub?
Short answer: yes! Schlage Connect Smart Deadbolt uses Z-Wave for connectivity, meaning it requires a compatible hub to connect to your Wi-Fi-based smartphone and other smart devices—for remote control.
How do I reset my Schlage wireless adapter?
To reset the Schlage lock back to its factory settings, you can follow these steps.
- Disconnect the battery connection.
- Press and hold the button on the adapter for ten seconds. …
- Now, complete the process by pressing the reset button and then keying in the four-digit user code that you obtain when you buy the lock.
Does Schlage sense work without WiFi?
Schlage Sense WiFi Adapter
Then use the Schlage Home app to pair it with your deadbolt for access anywhere. *If you already have an iPad®/Apple TV® at home and connected to WiFi, the Schlage Sense WiFi Adapter is not necessary.
How do I find the code for my Schlage Lock?
For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.