Quick Answer: What does key lock mean on a washing machine?

The Key Lock mode disables the control panel so that the storage environment cannot accidentally be changed. The display will automatically lock after 15 seconds of the display not being used or when the drawer is closed.

How do you remove a key lock from a washing machine?

How to Bypass a Washing Machine Lid Lock

  1. Turn off the washer and unplug the appliance.
  2. Locate the retaining tabs and/or screws that hold the top horizontal panel down.
  3. Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.

What does the key on the washing machine mean?

“If you see a key indicator rather than a lock, this means that the door is locked. This may be because the child lock is on but may also be because the cycle is not finished or the machine has detected an error.

IT IS IMPORTANT:  Frequent question: Why does the speaker open the door?

How do you unlock a Fisher and Paykel washing machine?

You can unlock the washer door to remove your clothes by opening the pump filter cover at the bottom right of your washer. Simply place a coin or key in the slot and tilt it upwards to lever the cover open, then pull the door release tab.

How do I turn off the key lock on my Samsung washing machine?

The most common ways to activate and deactivate child lock are: press and hold the temp and spin/rinse buttons for three seconds.

What does the red key light mean on a Samsung washer?

A red key usually means that the door of the washing machine is blocked.

Why won’t the door open on my Samsung washing machine?

Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off. … If you get stuck, though, you can drain the water from front load washers using the emergency drain hose; once the water is gone, the door will unlock.

How do you open the front of a washing machine?

Locate a seam at the top of the washing machine. Use a pry bar or large screwdriver to push in between the seam at the top and the washing machine body. Gently loosen the front panel so it can be pulled away from the washing machine body.

Is there a reset button on a Fisher and Paykel washing machine?

If you’d like to reset your Fisher and Paykel EcoSmart washing machine to the settings that it left the factory with, start by entering Option Adjustment mode (outlined above). Then, press the ‘Delicate’ cycle and hold for three seconds. This action will reset the device to factory defaults.

IT IS IMPORTANT:  Frequent question: How do you make a door hook?

Why is my washing machine door not locking?

Common solutions for: My Washing Machine Lid Won’t Lock

If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.

How do you manually unlock a Samsung front load washer?

The washing machine door will be locked when it detects water in the unit. Wait and see if it drains out by itself. When water is no longer in the washer, reset the washer by pressing the ON/OFF or START/PAUSE button. Then wait for a minute to pass, and you can then unlock the door.

How do I take the child lock off my Samsung Eco Bubble washing machine?

To turn off the child lock on your Samsung washing machine simply push and hold the Spin/Rinse and Temp/Soil Level buttons for 3 seconds (temporary) or 6 seconds (turning it off completely).