There are many variations when looking at door trims, baseboards, or any decorative molding. As a general rule, door trim, or casing, will usually be about one-eighth of an inch thicker than baseboard.
Should door casing be wider than baseboard?
Generally, the casing should be about 1/8 of an inch thicker than your baseboard. This small difference in thickness allows for intentional, consistent joints throughout the home. For this reason, a slightly thicker casing has become the standard in modern home construction.
How thick should door casings be?
The most widely used door casing is 2 1/4 inches in width, but can range up to 3 inches. The thickness is typically 1/2 inch but can range up to 3/4 inch thick for a more substantial casing or more detailed profile. Door casing and window trim are typically the same width and are interchangeable.
Is door casing the same as baseboard?
Casings and baseboards are both used as transitional pieces to conceal gaps at joints with wall surfaces. The main difference is that casings are used at window and door openings, while baseboards are used at the junction with the floor.
What is the difference between trim and casing?
Trim is a general term, often used to describe all types of molding and millwork. Casing is a type of molding, typically used to trim the perimeter of windows and doors. … Crown molding (or crowns) is a type of molding, which is applied where the wall and ceiling meet.
What is the difference between casing and molding?
Casing trim is placed around openings, such as windows and doors. Baseboards are positioned along the bottom of walls, while crown molding is installed at the top near the ceiling. Finally, all trim that is placed directly on walls, not at openings or corners, is referred to as wall trim.
What is the thickest baseboard?
A quarter inch is standard. If that’s what you’ve got, you can use a thicker baseboard (it comes standard in up to 11/16ths inch thick) to cover the gap.