Grasp the handles on either side of the door and pull out gently. The handle spindle and lock tumbler are attached to the outside plate and will pull away with it. The inside handle will drop away.
How do I remove a storm door handle?
Remove the door handles and nylon washers by loosening the set screw located on the side of the inside handle with a 3/32” hex wrench. Slide the inside handle and nylon washer off the spindle of the outside handle. Remove the outside handle, spindle and nylon washer from the door.
How do I remove a storm door handle and lock?
Remove the lock body from the storm door by pulling down from the top of the casing with your finger or the tip of a flat head screwdriver. If the lock body doesn’t pop out easily, you can also insert a screwdriver into the hole in the door and into the key mechanism to help pry it out.
Can a storm door lock be rekeyed?
*Only Andersen® brand storm door with mortise hardware can be rekeyed. Whether your entry door uses a Schlage® or Kwikset® key cylinder, a replacement storm door key cylinder may be required to match the two (2) locks.
Can you cut down a Larson storm door?
A storm door that is primarily glass will probably not be able to be cut down. It is possible to cut down a storm door made of wood, but other types are usually prohibitively difficult to modify.
Does a storm door need two closers?
Your storm door likely has one or two closers. Adjusting the speed on these can help prevent your door from slamming and ensuring a tight close every time. If you have two closers, adjust one at a time. … Both closers should now be set at the same speed to ensure your door closes every time.
Are storm door handles interchangeable?
The screw hole sizes and patterns changed from the traditional storm door hardware and the inside used a separated two piece handle and deadbolt. . With the new century came new storm door hardware. … The screw hole patterns changed and are not readily interchangeable.
What side does the storm door handle go on?
Stand in the doorframe with your back along the hinges. If the hand by the doorknob is your right, it’s a right-handed door. If it’s by your left, you have a left-handed door. Then, make sure you measure correctly for your new storm door.