Four section bifold or sliding doors are normally covered in two blinds. WIDTH – Blind 1: measure from the wall on the far inside left of the recess to the centre of the middle door frame. Blind 2: measure from the centre of the middle door frame to the wall on the far inside right of the recess.
What are standard bifold door sizes?
The Most Common. The majority of bifold doors are 80 inches tall. The width varies depending on available space, but openings typically graduate in 24-inch increments up to 72 inches or more.
How much smaller should a bifold door be than the opening?
The actual dimension of bifold doors is always ½” smaller in width than the stated size to accommodate the necessary clearance for proper operation of doors. Bifold doors must be 1-1/2” shorter in height than the finished opening.
Can you cut a bifold door to fit?
The width of a bifold door can be cut up to ¼ inch on each side to fit better into a door rough opening. Tape off the side to be cut with painter’s tape then use a circular saw or planer to trim the width of the bifold door. … Then you will be able to cut the width of a bifold door with confidence!
What is the rough opening for a 36 bifold door?
Bifolds need a finish opening of the width by 80″ high……so a 36″ bifold needs a FINISH opening of 36×80.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.